Repeater panel
The repeater panel is one of the fire alarm equipment. This device is located in a place that is far from the fire alarm control panel. This place is usually the place where firefighters enter the building when there is a fire. This panel can include warning lights, LCD screen and buttons to control the system on the LCD screen.
Traditional fire alarm control panels did not have a way for people to control fire alarm systems, such as a silence button feature or a reset button feature. If someone activates the manual fire alarm panel by pulling the lever, the fire alarm system will turn on and the alarm will sound. To turn off or reset, the fire alarm system must be reset.
remote control
Many of these panels have two lights, one to indicate that there is power in the panel, and the other often lights up when there is a problem with the system’s wiring. When these panels sound, the residents of the building can see if there is a fire in the building or if there is a problem with the electrical system or the wiring of the fire alarm device by seeing the panel lights. If there is a connection in the panel system or its parts fail, the error sign must be displayed on the LCD screen of the panel within 100 seconds
When should panel repeater be used?
Since the features of a control panel may be needed by different people at different times, there is no need to provide them in a single location or location. Because some maintenance personnel may only need the sign and type of error provided by the system and not necessarily the information related to fire records recorded in the panel.
In some systems, the main control panel may be in a location that is not easily accessible and additional repeater panels may be required at the main entrance to the building. Also, in cases where large buildings have several different entrances, in addition to placing the repeater panel at all entrances of the building, you should consult with the consultants of the Hyperfire equipment and fire services store about the possible need for other main control panels.
In buildings where occupants are not constantly present, it can be useful to place equipment in a location that is visible from the outside for fire and rescue. These equipment can be installed outside the building or visible through the door if necessary.
The main control panel and repeater equipment (which includes any repeater) must also be suitable for fire evacuation procedures, so each repeater must have the same standard and level of integrity as the main control panel.
Although LCD text displays may be sufficient for the user, these panels display separate indicators in each area for fire and rescue service personnel. These indicators include various charts and information about the history of fire in that place or in that area, as well as the state of entrances and exits of various large buildings.
All fire system wiring must be placed in fire-resistant cables that are connected to the power supply. Therefore, repeater panels are no exception to this rule.
What exactly is a repeater panel?
Repeater panels, which are used as one of the fire alarm equipment, include the following three different types.
Active: These types of repeaters indicate complete events in the main control panel and also (main fire system control panels) such as silence, reset, etc. are done through them.
Disabled: This type of repeater only indicates some or all events on the main fire alarm control panel, but does not control the fire system.
Mimic or imitative: This is usually in the form of a printed or painted plan of the building, with these zones marked by the main fire alarm panel or fire repeater panels, and having certain signs to identify each zone in case of danger.
In addition, it is important to specify how to use the repeater. If the main control panel is placed correctly and the system is compatible with placing any repeater in different places of the building. It can be said that the repeater panels are intended only for the purposes of receiving various types of information, otherwise the repeaters are intended for the purpose of fire alarm and then receiving additional information.
Advantages
If it is difficult to install the main control panel at the main entrance to the building, a repeater can be used to ensure the availability of fire control facilities on site so that the control panel can be installed elsewhere in the building.
A main control panel installed in a particular part of the building may be damaged and the system may fail. By placing the main control panel in a safe place and using a repeater panel in the entrance area, the integrity of the system is maintained at a higher level, and possible future costs for repairing possible damages are likely to be lower.
If the building has security facilities at the main entrance, repeater panels may be used to ensure that all relevant personnel are notified in the event of a fire.
In cases where separate protected premises have common entrance areas, it may be necessary to provide additional repeater panels for the common areas.
As a result, a repeater is installed in a place far away from a main control panel. If the place where the main control panel is supposed to be installed, which is usually near the main door of the building, is unsafe, a repeater can be installed there, the price of which is much lower than the price of the main control panel, and the repeater panel can be installed somewhere It should be installed safely inside the building at a distance away from the repeater panel. Therefore, the existence of repeater panels is necessary for each main control panel of the building. To prepare the repeater panel and to know its types and prices, you can visit the Hyperfire firefighting equipment store.
